Ingenico Move 5000 - Connecting to Wi-Fi

How to connect terminal to the network

Step 1: From the Home screen use 0-0-0-1 to access the Admin Menu

Step 2: In the Admin Menu you will touch "Wifi Parameters"

Step 3: To scan for a network select "Scan Network" to remove a network select "My Network"

Step 4: after selecting "Scan Networks" you will then locate and select the network to connect to where you will be prompted to enter the password.

The password can be entered on the keypad or the onscreen keyboard can be used (is touch capable)

• Once the device is connected to the network the connection status in the top left will turn green

Additional Notes:

• The terminal will boot to the home screen (TriPOS) despite terminal connection status
• Menus are accessible before and after the terminal is connected to the network
• If the terminal is not connected to the network the status in the top left will be Black

Terminal Settings: 

Note: These settings should be set by default we should not have to adjust these

Port: 12000

SSL: OFF

Comm type: WIFI - Server

Mode: DHCP

***************Notes******************

To connect a terminal to a Wireless Hotspot

We can attempt to connect the Wireless terminal to a Mobile Hotspot as long as the mobile device is receiving good service, The client will need to enable the hotspot feature on their mobile device and follow the standard wireless connection procedures above. 

The client will need to locate the name of their network hotspot and choose to connect to that network. 

Please note – It is important that the client understands their mobile plan – in some cases they may be charged for any data usage if they do not have an unlimited hotspot plan as the terminal will constantly use 5Mbps Minimum.